Unless otherwise indicated all vintage accessories are new.
The indicated prices do not include mounting.
Any reference to the Hammond organ B-3 also applies to the C-3/A-100/RT-3/D-100 models.
Contact us if you have special requests or if you need other information |
|
|
|
Leslie Control Preamplifier
Allows you to use the Leslie with a keyboard, a guitar or others instruments.
Continuously adjustable Gain control with Led indicator overdrive allow you to use full input dynamic without saturation. Volume control for control general Leslie volume.
Pedal includes our exclusive Logical Leslie Control (LLC) circuit to control Leslie speed. LLC circuit allow you to control also Stop motors with tubes state Leslie.
Two temporary, silent, switches controls speed and stop of the Leslie. Two Led indicator for Leslie motors status (Start/Stop and Slow/Fast).
Available separately classic Leslie Half-Moon control to connect to the pedal for control the Leslie also with it.
- Power 220V or 117V
- Size (cm) 20 x 15 x 4
- Weight 1 Kg
The order must specify Leslie model and supply voltage.
Cod. LCP - Euro 350,00
Optional accessories
- Stop control cable for Brake Circuit on tubes state Leslie free ended Leslie side.
Code LCP-CBL1 Euro 20,00
- Stop control cable for Brake Circuit on tubes state Leslie ended Leslie side with Leslie Brake Circuit connector
Code LCP-CBL2 Euro 30,00
- Three position (Slow/Stop/Fast) Half-Moon control to install to the keyboard
Code LCP-HM - Euro 80,00 |
 |
|
| - |
 |
 |
|
|
|
B-3 Effect Unit (Combo)
Effect Unit for Hammond Organs B-3 type (C-3/A-100/RT-3)
Tube state Reverb, Overdrive and Effect Loop
- Reverb with Accutronics® springs reverb can, two tubes (12BH7, 12AX7), intensity control and reverb output for reverb signal amplification separate from organ's direct signal
- Overdrive with a 12AX7 tube for classic tube saturation without Leslie tweeter risk damage. Continuous control for switch from soft to loud saturation
- Effect Loop circuit with a 12AU7 tube for process organ signal with external devices (delay, flanger, wha-wha, etc.)
Unit come with our exclusive Tube Interceptor Socket (TIS) for easy and faster connection to organ preamplifier
Finish standard natural polished multilayer. With extra price available in solid walnut embossed black or pads.
Code EU-3Combo Euro 890,00
(included TIS device) |
|
|
| - |
|
|
|
|
|
B-3 Effect Unit (Kit)
Same features as Combo model but supplied in kit to install inside the organ.
Includes electronic tube state chassis, Accutronics ® spring reverb tank, all controls and connections cables.
Code EU-3Kit - € 620,00
(included TIS device) |
|
|
| - |
|
|
|
|
|
Tube Interceptor Socket
Allows you to intercept signal of the B-3 AO28 preamplifier, send it to the external and return into the pre. Provide also a 6, 5V connection to tube filament power supply.
Metal box with signal shielded function.
No danger of disconnect the cable.
Mounts instead of a tube (see other images describing the simple mounting sequence)
Code TIS - € 90,00 |
|
|
| - |
|
|
|
|
|
B-3 Manual Bass
The pedalboard at your fingertips!
The Manual Bass provides a true 16 'on the first octave of the B-3 type Hammond Organs keyboard to play a very powerful bass.
You can equalize at your pleasure each of first 12 TWG’s tones.
With a simple switch you can enable Manual Bass removing low foldback or disable Manual Bass enabling low foldback organ’s keyboard.
The Manual Bass device comes with connection cables to TWG, keyboard and organ power switch.
- Power 220V/117V
(must specified in the order).
- Size (cm) 18 x 7,5
Code B3MB - Euro 300,00 |
|
|
| - |
|
|
|
|
|
Logical Leslie Control
Allows you to control Leslie speed through classic Half-Moon and/or temporary, silent pushbuttons. Pushbuttons can operate with hand and/or foot. Two Led indicator for Leslie status motors (Slow/Stop/Fast).
Protects against the risk of electric shock using Leslie 147 or 251 type (this Leslie use mains voltage for speed control).
LLC unit can control up two Leslie simultaneously, also of different type and can control also Leslie clones.
You can control very easily also Leslie type 147 with L100P Hammond Organs.
Installation is very simple. Unit work at 6,5 Vac. This voltage can get from the organ’s tubes filament.
One Leslie control without stop motors
Code LLC1 € 70,00
One Leslie control with stop motors
Code LLC1S € 90,00
Two Leslie control without stop motors
Code LLC2 € 110,00
Two Leslie control with stop motors
Code LLC2S € 130,00 |
|
|
| - |
|
|
|
|
|
A-100/Leslie interface connection
Send to Leslie signal output from organ’s preamplifier rather than organ’s amplifier as provided by the original connection.
Sound difference is remarkable and you can easier ear it!
Ideal to connect A-100 Hammond organ to 122 type Leslie.
With 147 Leslie type interface mix direct and reverberated signal from the organ and send it to Leslie input.
With 251 Leslie type interface send reverberated signal to Aux Leslie input channel.
Inteface allows you to use a 3 wires Half-Moon switch for the Echo Control rather than 7 wires Half-Moon switch more rare and expensive.
You can connect organ and Leslie with different power voltages (i.e. organ at 117V with Leslie at 220V or vice versa).
Order must indicate Leslie model and supply voltage for Leslie and Organ
Without Echo-Control, without voltage conversion
Code CB-A100-1 € 80,00
With Echo-Control, without voltage conversion
Code CB-A100-2 € 120,00
With Echo-Control and with voltage conversion
Code CB-A100-3 € 150,00 |
|
|
| - |
|
|
|
|
|
Connection Organ/Leslie with different power voltage
Connect organ and Leslie with different power voltages (i.e. organ at 117V with Leslie at 220V or vice versa).
Order must indicate Leslie model and supply voltage for Leslie and Organ
Code CB-MX € 100,00 |
|
|
| - |
|
|
|
|
|
Power Relay
Allows you to connect two Leslie of the same type to a single Leslie socket.
- Power 110V/220V (by State in the order).
Order must indicate Leslie model and supply voltage for Leslie and Organ
€ 250,00 |
|
|
| - |
|
|
|
|
|
Connection kit Organ/Leslie
Kit content:
n. 1 connection cable (6 or 9 pin)
n. 1 half-moon for Leslie speed control
n. 1 connection interface
Starting from € 300,00 |
|
|
| - |
|
|
|
|
|
Leslie motors stop Kit
Original kit for motors stop on tube state Leslie
|
|
|
| - |
|
|
|
|
|
Leslie reverb control kit
New and original kit for control Leslie reverb volume by 3 position Hald-Moon. |
|
|
| - |
|
|
|
|
|
760 Leslie type preamplifier
New and original 760 Leslie type preamplifier to fix on the rear panel of the Leslie.
Two independent mixed input. A long cable connect a two pushbuttons switch pedal to the preamplifier for Leslie motors control.
Power voltage 220V
|
|
|
| - |
|
|
|
|
|
Leslie 760 type Pedal Combo preamplifier
New and original 760 Leslie type Pedal Combo preamplifier.
Two independent mixed input.
Two pushbuttons switch for Leslie motors control.
Power voltage 220V |
|
|
| - |
|
|
|
